Hello,
Is it possible to create a transport rule with multiple predicates using Powershell?
For example, I would like to create a rule that will apply to messages either send by a group or sent to another.
Moreover, I would like to do the same thing with actions, first apply an action to the message and then one more.
Regards,
Chris
We have attached transport rule (attached) which doesn't work after Exchange 2013 CU9 upgrade.
Recreated the rule but no luck
SAH
Dears
After reading log files i found the Exchange server delay around 24 hours to forward message to next mx record preferences for many messages what could reason is i can adjust this configuration?
Hello guys,
Is there a way to set dnslookups using set-transportservice using powershell or in anyway we can updatge/set it but through powershell
thanks in anticipation
Hi All,
We have a public distribution list which has individual users and other PDL's added into it(cascading PDL'S)
Ex: - The root PDL is "RootPDL" which has individual users u1,u2,u3,u4 and other PDL's (ChildPDL1 with users c1,c2,c3; ChildPDL2 with users d1,d2,d3; and ChildPDL3 with users e1,e2,e3).
This RootPDL is added to SharePoint 2010 list so that 'Alerts' can be received by the users.
All the PDL's are security groups in AD and below setting is unchecked in Exchange
'Required that all senders are authenticated'
With above settings, alerts are sent to individual users added to the root PDL which are u1,u2,u3 and u4. But users(c1,c2,c3,d1,d2,d3,e1,e2,e3) inside ChildPDL's still do not receive any alerts.
How does an exchange server can sends email to all user inside all PDLS?
Any inputs/suggestions/information about this issue would be helpful.
Anitha Vyas
Hi ,
In exchange 2013 sp1 SUBMITFAIL event id is happening for some messages .But at the second time that the same message is delivered perfectly to the end users.
My question is simple ,is this an bug in exchange 2013 sp1 if so on which CU it will be corrected ?We have to update to our customers so all of us please provide your suggestions as soon as possible.
Thanks & Regards S.Nithyanandham
I have two exchange server 2010 in cluster 2008r2. Hub, Mailbox & CAS roles install in both exchange server. My EX1 working fine but i switch my mail flow to another EX2 then my incoming & outgoing mail not able to sending. & no delivery failed message received.
but my OWA open out side the office & able check email. but i try to send email then it save in draft automatically.
I check all replication & health passed.
all services of exchange server is running.
no failed delivery message receive in both side.
If i shutdown my EX1 server then no queue show in exchange EX2.
I have added an Exchange 2013 Server to my domain which already has 2 Exchange 2007 servers. Outgoing mail from the 2013 server gets stuck in the queue with the error
"Failed to connect. Winsock error code: 10060, Win32 error code: 10060, Error Message: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond xx.xx.xx.xx:25"
The Exchange 2007 server can still send mail out just fine. I have removed my smart-host from the mix temporarily to make sure that it wasn't them by creating a send connector that sends directly to the internet. Some messages will get through initially but the outgoing mail queue fills up quickly with those that do not get sent.
old286
HI All
Please let me know how to Start Traning in Exchange Server from Basic Level to Root level.Iam keen Intrested to Move Ahead in this Server Domain
Regards
Syed
Hello,
I am having a very common issue:
Some users in Exchange are receiving duplicated mails because they belong to a distribution group. When a user sends an email to this distribution group in the FROM field and to their email address in the CC field, the destination users receive the mail twice.
Is it possible to create an Exchange rule to avoid emails to duplicate in destination mailbox?
Thank you
Team,
I am having two VM (exchange 1 and exchange 2) on hyper on which i had installed multi role exchange binaries i.e (cas and mailbox) on both vms. Due to maintainance i had switch off exchange 2 server. My observation was after switching off exchange 2 server. All users outlook client was showing connected but mail flow was not happening internal as well as external. After switching on exchange 2 server mail flow start working. Please suggest what will be the issue.
Note : For load balancing exchange servers we have array load balancer in our infra.
Hi,
We recently want to apply Throttling Policy to user mailbox. Our main goal is to prevent mass emailing with the MessageRateLimit parameter.
So as test purposes, we have ran these commands :
New-ThrottlingPolicy -Name LimitMessagesSent -RecipientRateLimit 20 -MessageRateLimit 1
Get-Mailbox -resultsize unlimited | where {$_.EmailAddresses -match "test@myorg.com"} | Set-Mailbox -ThrottlingPolicy LimitMessagesSent
Get-ThrottlingPolicyAssociation test@myorg.com shows the result :
Name ThrottlingPolicyId
---- ------------------
test LimitMessagesSent
Try from Outlook and OWA to send more than 1 message in a minute.
Outlook , (Exchange account test setted) : Mailbox can send more than 1 email in a minute, looks like the policy is not applied.
OWA : Mailbox can send more than 1 email in a minute, looks like the policy is not applied.
Outlook (POP/IMAP) : The policy is correctly applied, restriction works.
Why it's not working for Outlook with Exchange setting (and not pop imap), and with OWA?
Did we miss something?
Thank you in advance for your help.
Kind Regards.
hi, i have Exchange 2013 CU8, some days ago i notice that i receive mail from me@domain.com to me@domain.com, i check and i create SPF Record and Configure Sender ID, but Email come again,
here is config of SenderID, what can i Check, what can be reason?
i, also, saw this instruction
https://support.symantec.com/en_US/article.HOWTO124678.html
but cant find any answer, i disable Content Fultering and check from telnet, mail Sent, outside of organization
no any error like this "550 5.7.1 Sender ID (PRA) Not Permitted"
how fix this issue?
i have exchange organization with exchange 2007 sp 3 & exchange 2013 sp1.
there are all users in Exchange 2013 server (mail flow is through Exchange 2013 server)
i have single forest, 2 site (site1, site2), root domain root.local and 1 child domain ch.root.local
DC for child domain is located in site2 (dc.ch.root.local)
multirole exchange 2013 server is installed in root domain.
i am traing to configure smtp receive connector with NTLM auth and have one problem.
when user in child domain try send email through this receive connector i see in log
<,AUTH NTLM,
>,334 <authentication response>,
*,SMTPSubmit SMTPAcceptAnyRecipient BypassAntiSpam AcceptRoutingHeaders,Set Session Permissions
*,CH\user1,authenticated
*,,Setting up client proxy session failed with error: 535 5.7.3 Unable to proxy authenticated session because either the backend does not support it or failed to resolve the user
*,,"Setting up client proxy session failed with error: 451 4.4.0 Primary target IP address responded with: ""535 5.7.3 Unable to proxy authenticated session because either the backend does not support it or failed to resolve the user."" Attempted failover to alternate host, but that did not succeed. Either there are no alternate hosts, or delivery failed to all alternate hosts. The last endpoint attempted was 192.168.1.15:465"
but authentication is succesfull for users from root domain.
why do it can be?
Thanks.
Hi
I am running Exchange server 2013 on a Virtual Machine as well as My Active Directory Server on another Virtual Machine hosted on an physical Machine running Window Server 2012, and I want to Change the Administrator Password on all there Machine but I'm scared it might affected my Exchange server mail flow, its because I did once change the password and it affected my Exchange Server.
Can any one tell me how I should go about changing the Administrator password on all Three Servers without affecting my mail flow on exchange server 2013..??
Thank you
In doing the setup of Exchange 2013 we made sure that the internal and external URLs on all 4 servers were the external FQDN. What I am wondering is if internally we pointed the URLs to the internal server mailbox/cas server for that particular AD site if an outage occurred, such a down for an offline defrag, would the DAG route the traffic to the other mailbox/cas server without the load balancer?
The reason I ask, is I think the LB and/or firewalls are negatively impacting the flow of traffic between clients and servers internally. So if the DAG will failover without a LB, and internal clients will not be affected, I'd prefer to route the clients internally to the internal FQDN of the servers.
When I do a test on MXToolbox.com our DAG servers are responding with the internal FQDN of the server that received the request. When I attempt the change the FQDN on the Default Frontend (servername) I get an error that it can not be changed because Exchange Servers are selected. Even if I uncheck Exchange servers I still can not change the FQDN. Having said that I don't really want to uncheck that as I am worried it will break communication between the servers.
How do you get the mailbox/cas DAG to respond with the correct external URL?
I am trying to deploy an Exchange Edge Transport server on my lab enviroment, I deployed Edge Transport Server without any problem, but when it comes to importing the Edge Subscription file in my Mailbox Server, I get an error message which says the time settings between your servers are not synchronized, I have checked and corrected the time and date settings and tried again, but I still get this error.
what is actually missing in here?
We are running Exchange 2013 with multiple accepted domains.
We are stuck with some external recipients reporting that mails sent from 'Domain B' are going to SPAM folder with the reason as "sender not validated'
We have single send connector with HELO response FQDN set as the primary default domain (Domain A)and all other accepted domain mails using the same connector for sending mail. We are using a wildcard certificate as *.domainA.com.
One option may be to define another send connector with Smart host and HELO responce FQDN as that of Domain B so that emails sent from Domain B users, take a different route with different source address and reach gracefully.
Is their a better way doing this without involving Smart host