http://social.technet.microsoft.com/Forums/exchange/en-US/1fd3a931-efdf-4e22-82dd-8a3996ce54bd/getting-erroritempropertyrequestfailed-error-while-creating-attachment-in-restore?forum=exchangesvrdevelopment
↧
Getting ErrorItemPropertyRequestFailed error while Creating Attachment in restore using EWS.
↧
Configure a all serve like that they can send & received mail from servers where there mailbox configured.
Hi ,
We have three Exchange server 2010 with all role configured ( Mailbox, CAS & HUB). every server has 2000 or 3000 recipient.they are located on different sites.
I want to configure a all serve like that they can send & received mail from servers where there mailbox configured.
currently my set is my one server send a message & other received.
is it possible so my all server send & receive messages.?
Thanks & Regards,
Pradeep
↧
↧
Issue when Creating a Federation Trust with MFG (Microsoft Federation Gateway)
I am trying to create a Federation Trust with MFG (Microsoft Federation Gateway). However, I am running into a problem. I see in the following that link (http://technet.microsoft.com/en-us/library/ff607475(v=exchg.141).aspx) that I have to run this command:
Set-ExchangeServer -Identity "MAIL01" -InternetWebProxy "<Webproxy URL>"
Please note that I have the following in our Exchange 2010 SP3 environment:
Two CAS/HT Servers (CAS Array between the two)
Two mailbox servers (DAG between the two)
One mailbox server (for stand-alone mailbox/archive databases)
We use windows load balancing and the internal/external VIP name is "mail.domain.com"
1. What do I put for the "Web Proxy URL"?
2. Do I have to run the Set-ExchangeServer -Identity "MAIL01" -InternetWebProxy "<Webproxy URL>" command on every server?
↧
Is there a way to create a rule that sends and Auto Response for a shared mailbox?
I have a shared mailbox set up that receives emails that are sent to 3 different addresses:
information@mycompany.com
orders@mycompany.com
technical@mycompany.com
I would like to create a rule that would send an auto response when someone emails one of these addresses. However, I don't want an auto response sent to orders@mycompany.com so I can't just set up an "out of office" reply for the mailbox.
Is there a way that I can create a rule to send an automated response to 2 of the 3 addresses?
Nate
↧
What is the settings of Hub transport server for external different domain users.
Hi
I am Anil,
I have installed new Exchange 2007 sp3 on win 2008 server.In my organisation mails are working but i have tried to send mails on different domain.then mail is not going on that domain.
Can u tell me the Hub transport settings for different domains.
I have already register domain.
Thanks
↧
↧
How to send emails to distribution group MS Exchange Server 2010?
First off, I have this message here because I could not find a forum for Exchange 2010. Please excuse this.
Alright, I'm not very versed in Exchange, (learning as I go) so please forgive me for the lack of proper details/ lingo.
I'm trying to create email distribution groups for my church.
We need to be able to send a single email to a group, and have it forward out to everyone in that group.
For example: if I send an email to 'deacons@church.com', the email needs to go to every email address (even personal) that is in the 'deacons' distribution group.
So far, I can make it where ONLY people on the church network can send to the distribution groups, and then, ONLY emails that are created FROM the church network can receive them.
This is some headway, obviously, but I am just at a loss as to how to 'open' this group up to the 'general public'.
I need to have the distribution groups based off of the server, and NOT people' individual email/ Outlook accounts, because members of the congregation need to be able to send messages to these emails as well. I can't create individual distribution groups for 1000+ people Outlooks.
Any help would be spectacular.
↧
Exchange 2013 Spam Email sent to wrong recipient
Hello,
One of my users reported a dangerous Spam email containing a "You received a voice mail" subject and an attached zip file. This address was a spoofed one from our own internal domain no-reply@ourdomain.com. I did see some emails just like this get caught by exchange spam filters but somehow this one got thru.
I figured out it got thru because I had my own domain whitelisted in spam fighter exchange module. Hopefully changing this will allow the other agents to block this kind of email going forward, but the big problem is not just that it got thru but that it wasn't even addressed to the recipient that actually received it.
How can an email addressed to user1@domain.com be received byuser2@domain.com? I've verified these two users have nothing shared between them, nothing delegated or forwarded. User1 is a mailbox that is no longer in use, but hasn't been disabled yet. This is the first and only time I've seen this, but I'm concerned about legitimate email getting routed incorrectly.
Here is the message properties with my info replaced for security purposes. It doesn't even mention the actual user2 address anywhere. Any ideas on how this got routed wrong?
Received: from INTERNALSERVER.domain.local (internalserverip) by
INTERNALSERVER.domain.local (internalserverip) with Microsoft SMTP Server (TLS) id
ISP IP via Mailbox Transport; Mon, 5 May 2014 09:15:20 -0500
Received: from INTERNALSERVER.domain.local (internalserverip) by
INTERNALSERVER.domain.local (internalserverip) with Microsoft SMTP Server (TLS) id
ISP IP; Mon, 5 May 2014 09:15:12 -0500
Received: from net-93-64-16-64.cust.vodafonedsl.it (93.64.16.64) by
remote.domain.com (internalserverip) with Microsoft SMTP Server id ISP IP
via Frontend Transport; Mon, 5 May 2014 09:15:11 -0500
Message-ID: <NOU3ZHBH.3589518@rowinsky.com>
Date: Mon, 5 May 2014 16:12:57 +0100
From: Microsoft Outlook <no-reply@domain.com>
User-Agent: Mozilla/5.0 (Windows NT 6.1; rv:24.0) Gecko/20100101 Thunderbird/24.2.0
MIME-Version: 1.0
To: <User1@domain.com>
Subject: You received a voice mail
Content-Type: multipart/mixed;
boundary="------------XXXXXXXXXXXXXXXXXXXX"
Return-Path: falliblemud9@rowinsky.com
X-MS-Exchange-Organization-PRD: domain.com
X-MS-Exchange-Organization-SenderIdResult: None
Received-SPF: None (INTERNALSERVER.domain.local: no-reply@domain.com does
not
designate permitted sender hosts)
X-MS-Exchange-Organization-Network-Message-Id: XXXXXXXXXXXXXXXXXXXXXXXXXX
X-MS-Exchange-Organization-SCL: 1
X-MS-Exchange-Organization-PCL: 2
X-MS-Exchange-Organization-Antispam-Report: DV:3.3.5705.600;SID:SenderIDStatus None;OrigIP:93.64.16.64
X-SPAMfighter-Result: E-mail accepted (Whitelisted: GlobalWhiteListDomainFound <domain.com>)
X-SPAMfighter-Direction: Inbound
X-MS-Exchange-Organization-AuthSource: INTERNALSERVER.domain.local
X-MS-Exchange-Organization-AuthAs: Anonymous
Thanks.
↧
Mail is Slow between Exchange 2010 and 2013 During Co-Existance Transition
Hello,
I recently migrated from a single Exchange 2003 server to a single Exchange 2010 server
I am now trying to Migrate from Exchange 2010 to Exchange 2013.
I have a test user on Exchange 2013, and Internet Mail works fine and quickly both inbound and outbound.
However, when I try and send between a 2010 user to my 2013 user, delivery takes around 10 minutes.
On the 2013 server I see health check messages, and my 2010 user's message stuck in retry status. The messages eventually clear and the mail is delivered. Any ideas what is causing this delay?
In terms of connectors I have all the defaults. And I created 1 for internal relays from devices. Which works fine.
I have two Exchange 2013 servers configured in a DAG, but I don't have a load balance in place as of yet. So only server 1 is being accessed as the CAS.
Thanks
↧
Sender name contains recipient name
It seems that a lot of our spam that is sent into our system has faked the sender name to contain the
recipient name. For example, if the user the mail is sent to is john.doe@microsoft.com the spam will be sent FROM john.doe@somedomain.com and then a few minutes later an exact copy of the email will come from john.doe@anotherdomain.com. They're
obviously reusing the username but changing the domain name. Is it possible to create a transport rule (or some other filter) that can eliminate any message where the sender address contains the recipient user name? So that any message that contains
john.doe is deleted/marked as spam? Maybe also add an exception unless sender is john.doe@microsoft.com so that users can still email to themselves? Maybe with an is authenticated exception?
↧
↧
Looking for help with respect to configuring MS Exchange server to handle attachments over 10 MB for forwarding to Salesforce (Email-to-case).
Looking for help with respect to configuring MS Exchange server to handle attachments over 10 MB for forwarding to Salesforce (Email-to-case).
Problem - SFDC does not create cases from emails that have more than 10 MB of attachments. Our clients will not go-live if their clients cannot send in emails with attachments over 10 MBs
Potential resolution - Configure MS exchange to strip off the attachments(if over 10 MB) and store it in a public folder, forward the email to Salesforce (so the case gets created or the email is associated to an existing case), the client should have some way to know if the attachments were stripped off and should be able to dlownload the attachments and continue with case resolution.
Any help is appreicated!
Thanks
Problem - SFDC does not create cases from emails that have more than 10 MB of attachments. Our clients will not go-live if their clients cannot send in emails with attachments over 10 MBs
Potential resolution - Configure MS exchange to strip off the attachments(if over 10 MB) and store it in a public folder, forward the email to Salesforce (so the case gets created or the email is associated to an existing case), the client should have some way to know if the attachments were stripped off and should be able to dlownload the attachments and continue with case resolution.
Any help is appreicated!
Thanks
↧
how to change properties of multiple mailbox in 2010
Hi
I want to know how to change the properties of multiple mailboxes in 2010.
Because in exchange 2007 we cant select multiple mailboxes,so we changed information of mailbox or settings of mailbox by one by one.
Is this possible to select multiple mailboxes in exchange 2010 and update settings of them at a one time.
Regards
Anil
↧
how to DAG work in the case of one DAG fail
Hi,
Suppose my one DAG copy failed then how to switch exchange on second copy of DAG.
In 2007 exchange we configure cluster,But in 2010 there is no cluster feature,so how it switch from one DAG copy to Another DAG copy in the case of failure.
Regards
Anil
↧
I want know simple process of mail flow
Hi ,
Suppose i am sending mail from gmail.com to abc.com.
so what is the mail flow to reach mail at Abc.ocm.
Regards
Anil
↧
↧
How to get pst from Exchange 2007 server
Hi,
How to get pst from exchange server 2007 & 2010.
Regards
Anil
↧
IIS SMTP Relay
We are using windows server 2008 Server R2. We installed IIS and the SMTP relay component. It is setup to relay mail to our exchange 2010 CAS server. All internal mail is relaying properly on this server to the exchange 2010 CAS server to internal email addresses. When someone tries to send to a recipient outside the organization such as to domain name hotmail.com, gmail.com microsoft .com, it does not relay the message. When I check the logs it looks like it does not even relay the external email address to the cas server.
The error message we get is below. Please assist in what is wrong.
Delivery has failed to these recipients or groups:
gogear22@hotmail.com
Your message wasn't delivered due to a permission or security issue. It may have been rejected by a moderator, the address may only accept e-mail from certain senders, or another restriction may be preventing delivery.
Generating server:PRI.cross.com
gogear22@hotmail.com
#< #5.7.1 smtp;550 5.7.1 Unable to relay> #SMTP#
Original message headers:
Received: from HH-DATAserver ([192.111.111.2]) by PRI.cross.com with Microsoft SMTPSVC(7.5.7601.17514); Wed, 7 May 2014 20:12:03 -0300 From: hh-dataserver<hhdataserver@pri.cross.com> To: <gogear22@hotmail.com> Date: Wed, 7 May 2014 18:12:03 -0500 Subject: test messase X-Mailer: SMTP Mail Component MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Return-Path: it@hh.cross.com Message-ID: <HH-DATAserverMwVN7miR9Odu00000056@pri.cross.com> X-OriginalArrivalTime: 07 May 2014 23:12:03.0714 (UTC) FILETIME=[C2029620:01CF6A49]
↧
Exchange 2013 TransportRoles\Data\Temp filling up disk
I have a single multi-role Exchange 2013 server and it would appear that it's not properly maintaining the temp files for the transport service. I still have all those folder locations at their default and the problem folder is c:\Program Files\Microsoft\Exchange Server\V15\TransportRoles\data\Temp
I never had a problem with this in Exchange 2007 but I am used to running a PowerShell script nightly to clean up the IIS log files. Do I need to do something similar for this temp folder? Is there a setting I can adjust so that Exchange will limit the size of this folder itself? If I stop the transport service and delete the files here will I lose anything?
Any suggestions or insight would be greatly appreciated.
↧
Forward NonExistent Email to another internal server ip
Hello we are migrating to exchange 2013 from an iMail server. we want to keep our list server up and running as exchange doesn't handle lists very well. How do we setup a forward on an nonexistent email address on the same domain name to go to our old imail server?
Here is a diagram of what we are wanting:
ISP -> Firewall -> Exchange 2013 -> nonexistent email -> iMail Server
↧
↧
S/MIME & IRM Together
How do S/MIME and IRM work together? Can you have users sign and or encrypt their messages with S/MIME and then also have some IRM policies in the background? I'm not sure of the exact scenario, but in general can these two technologies work well together?
MCITP Exchange 2010 | MCTS Exchange 2007 | MCITP Lync Server 2010 | MCTS Windows 2008 | MCSE 2003
↧
User mailboxes have more server-side rule options then shared mailboxes?
I was hoping to set up some server-side rules to keep a shared mailbox clean. The goal was to have some rules to move incoming messages to specific folders based off words in the subject. I opened the shared mailbox in OWA and found the action of moving the message to a folder was not available. At first I figured that's an action that's only available in a client-side rule. However, I then found that in my user mailbox that action is available server-side. It would appear there are a number of other action that are available server side to user but not shared mailboxes.
Anybody else notice this? Is this a bug?
Single Exchange 2013 SP1 server - nothing fancy.
↧
Removed DAG but Shadow Redundancy Queue is Stuck
Hello,
I currently have 3 Exchange servers setup in Co-Existence (EX2010, EX2013A, EX2013B). The 2010 Server is still the public facing server.
I had the two 2013 servers setup in a DAG which I could not get to work properly (Mailflow issues), so I removed it in hopes of returning the servers to standalone status.
The DAG appears to be gone. But in the Queue Viewer on EX2013A I see a Shadow Redundancy Folder with a Next Hop Domain of 2013B with 400 messages in the queue and counting. There are lots of healthmailbox messages from before I removed the DAG.
The Queue Viewer on EX2013B I see a Shadow Redundancy Folder with a Next Hop Domain of 2013A with 600 messages in the queue and counting.
Mailflow seems to work fine from all directions
Right now there are just a few test mailboxes on the 2013 servers, I want to make sure the environment is safe before migrating production mailboxes.
Thoughts?
↧